Guy Haley's Death Guard....

Hi everyone... This is a quick post... while I was on the GW Community page I saw this article had dropped and makes good reading for us Death Guard players....

So sit back and enjoy the read.. Guy Haley's Death Guard

Stay safe and enjoy xx

Updated FAQs Boots on the Ground

This is the second update to the core rules and indexes for the new eight edition...I can only see one update for DG... But I will add the page links to GW Site for the whole rule set....

Warhammer 40k Rule Book

Chaos Index

Warhammer 40k FAQs Boots on the Ground

Foetid Bloat~Drone

Labouring through the air on buzzing turbines, the Foetid Bloated~Drone drifts towards the enemy like an armoured plague fly....Foetid Bloated~Drones are amongst the most horrific weapons in the Death Guard arsenal...More then just armoured attack vehicles, each drone is in fact a Daemon Engine, driven by the rune~bound essence of a warp entity....This hideous war engine closes to point~blank range before dousing it victims in virulent foulness....

So what do you need to build the Foetid Bloat~Drone.

• Fine Detail Cutters.
• Mouldline Remover. ( Or craft knife...but please be careful if you use this tool to remove the lines).
• Drill.
• Plastic glue. (You can use super glue..but I like plastic glue).
• Superglue, wine cork and paper clips. 
• Cutting mat or sheet to protect your table.
• Paints and brushes.

The Foetid Bloat~Drone is on sprue C with the DG Plague Marines.... Once again use the booklet which you get in the box~set.... It gives you clear pictures and information on how to build the different miniature..
If you are joining me for the first time, and would like more information on how I do my builds....Then please go and check out my first build post....Poxwalkers....

So Here is a list of the Citadel colours I used for the Foetid Bloat~Drone:

• Athonian Camoshade (Shade).
• Agrax Earth Shade (Shade).
• Druchii Violet (Shade).
• Carroburg Crimson (Shade).
• Death Guard Green (Base).
• Bugman's Glow (Base).
• Ceramite White (Base).
• Warplock Bronze (Base).
• Zandri Dust (Base).
• Abaddon Black (Base).
• Leadbelcher (Base).
• Naggaroth Night (Base).
• Xereus Purple (Layer).
• Pallid Wych Flesh (Layer).
• Brass Scorpion (Layer).
• Nihikakh Oxide (Technical).
• Nurgle's Rot (Technical).
• Blood For The Blood Gods (Technical).
• 'Ardcoat (Technical).  

As with the Noxious Blightbringer I began by giving the mini a priming and base coating all in one with the new Death Guard Green rattle cans.... Then the fun starts with picking out the different details and greebles.... As with the  Noxious Blightbringer here is a lot of detail parts to pick out on this model... I wasn't happy with the Plague Spitters being perfect at the ends.... So I set about with my drill and snips... I flatted the ends off and bored out the holes and roughed the ends up... I wanted the the Plague Spitters to be gnarly like the rest of the mini .... For the oozeyness dripping from the horns.... I went with a layer of Nihikakh Oxide over a base coat of Ceramite White... Then to finish of I used Nurgle's Rot to give it a gloss green Nurgley colour.. For the Eye... I picked this out in purple and and gave it a coat of Ardcoat to give it the glass effect... 

Overall I'm really pleased with the final outcome of this Foetid Bloat~Drone..... and it looks really good on the giant 60mm bases ......One final comment on this mini is..I love the way the mini sits on the base...It uses the pipes and other bits to hold it up instead of a flying base which is cool....

Take care and have fun xx

Noxious Blightbringer

Heralds of pestilence and misery, Noxious Blightbringer pace solemnly before the Death Guard advance. They proclaim the arrival of Mortarion's sons through the tolling of their rusted Tocsins of Misery, hell~forged bells of massive size whose pearls rings through both the reality and the warp.

So what do you need to build the Noxious Blightbringer.

• Fine Detail Cutters.
• Mouldline Remover. ( Or craft knife...but please be careful if you use this tool to remove the lines).
• Drill.
• Plastic glue. (You can use super glue..but I like plastic glue).
• Superglue, wine cork and paper clips. 
• Cutting mat or sheet to protect your table.
• Paints and brushes.

So the Noxious Blightbringer come on sprue E with the Malignant Plaguecaster and a DG Plague Marines on it.... Once again use the booklet which you get in the box~set.... It gives you clear pictures and information on how to build each miniature..
For information on how I do my builds see my first build post....Poxwalkers....

So Here is a list of the Citadel colours I used for the Noxious Blightbringer:

• Nuln Oil (Shade).
• Agrax Earth Shade (Shade).
• Reikland Flesh Shade (Shade).
• Carroburg Crimson (Shade).
• Death Guard Green (Base).
• Bugman's Glow (Base).
• Screamer Pink (Base).
• Warplock Bronze (Base).
• Zandri Dust (Base).
• Abaddon Black (Base).
• Leadbelcher (Base).
• Naggaroth Night (Base).
• Xereus Purple (Layer).
• Pallid Wych Flesh (Layer).

I started by priming and base coating in one with the Citadel spray can of Death Guard Green.... Then I set about picking out the different details and greebles.... There is a lot of greebles on this model... So it worth looking at the painted one in the DG booklet that comes with the box~set to pick them out, if you can't see them.... And to be~honest I had thought I had got them all three times........only to find out that I hadn't.....so best to keep a eye out for them all.... And don't worry if takes you X amount of times to find them all.....Just keep looking around the mini.....
I'm really please with the final out come..... and looks really good on the 40mm base.... See my bases post if you haven't already on how I do them......

I've started next weekend build already... But you will have to wait till next Saturday... Stay safe and have fun...

Death Guard Plaguebrust Crawler / New Death Guard Tank / Other Death Guard News

Hi everyone....this is a quick post about a new heavy support vehicle that is shown in the new Getting Started in Warhammer 40k.....

This looks awesome to me....but I feel it could cause marmite syndrome..with people loving or hating it... But for me I love it already... It is nice for Death Guard to have its only vehicles instead of the run of the mill Space Marines vehicles with horns on... Don't get me wrong I like the horned vehicle...but after thousands of years of no rules I would expect the vehicles to take on a new form or shape...so I am hoping that some of the current vehicle for Death Guard get a Death Guard remake over.....

So what do you get with the Plaguebrust Crawler...well from the picture it's clear you get a mortar of some kind...not sure yet..a three barrelled gun of some kind... I'm thinking some sort of blight launcher.. And two sponsons......which I think are plaguespitters / or maybe plague probe..but more likely plaguespitters..... Plus you get this awesome spiky bulldozer blade which is a bonus for close in combat...... By the way these are only my thoughts and not official GW party line... But I can't wait for it to drop...

While on the subject of GW dropping new stuff for Death Guard.... Check this picture out......

That right Death Guard Terminator.... But this for another post....

Poxwalkers Update One

Hi everyone and welcome to a quick update on my poxwalkers... I have finished this first ten now... And I'm super happy with them...I still have the next ten to do which you get in the box~set and also when GW releases the next set I will be getting a pack or two depending on how many you get in a box and if there is different styles.... But for now here is a few pictures and a List of paints I used to do this five.... If you are interested and only finding this blog for the first time check out my first poxwalker post for what tools and paints I used and the first four minis...

Paints list:

• Athonian Camoshade (Shade).
• Nuln Oil (Shade).
• Agrax Earth Shade (Shade).
• Seraphim Sepia (Shade).
• Jokaero Orange (Base).
• Troll Slayer Orange (Layer).
• Averland Sunset (Base).
• Yriel Yellow (Layer).
• Rhinox Hide (Base).
• Doombull Brown (Layer).
• Skrag Brown (Layer).
• Zandri Dust (Base).
• Abaddon Black (Base).
• Leadbelcher (Base).
• Blood For The Blood Gods (Technical).
• Khorne Red (Base).
• Nurgle's Rot (Technical).
• Typhus Corrosion (Technical).

These guys are now about done.... I dry brushed some Nurgle's Rot to the weapons & clothing and Typhus Corrosion ... I added this to take the shininess off from the weapons and clothes and bring them more in keeping of my idea of what a Poxwalkers would look like lol... But for now Here is a few more pictures of the nine models... 

Stay safe and have fun :D 

Bases...

Hi everyone and welcome to this weekend update... This weekend I want to chat about bases and what I have been doing in between painting my Poxwalkers this week... So bases sound simply right??? A round disk or square one depending on which game you play.... And yes you are right they are... But it is what you do to them which makes the difference between a ok mini and a great or even awesome mini... Now It all depends on what you have in mind for them... Some people use cork and build up their bases... Some use sand and some use paints and special paints.. and some even use a mix of all three.... There is no hard and fast rules on what you want to use or do for your bases.... So for me I will be using a special paint called Agrellan Earth... It is a texture paint that you paint on your base and it dry and cracks to form cracked earth.... I like this paint for this reason....

Now I paint the top of my base in Rhinox Hide first so if the texture paint does crack and break of in parts it wont show the black base... Now you can leave it at that with the Rhinox Hide and paint the side in what ever colour you wish and that is base done for the table top.... But I don't I take it up a notch and paint it the texture paint.... Now this texture paint can take any where from a hour to a few to dry and cracking depending on the heat and how much you put on...I like to leave my bases a full twenty four hours before I move on to the next steps...

Now you can leave it at that, with the texture paint ... Just paint the side in what ever colour you wish and that is base done for the table top.... But I like to take a few more steps... Next give each base a good coat of Agrax Earthshade..I leave this for a hour to dry... Then next its time to crack out the drybrush paint... I Ike to use Terminatus Stone over Agrellan Earth... Just to break it up and give it some texture.

Right the next step is to place flock turfs on the base to add some form of vegetation to it... Again you don't have to do this you could use micro rocks or bits of building...it is up to your imagination....In this case I am using these dead turfs I found online at a well know market site.. My idea behind the burnt/ dead grass ... is has the the Death Guard move forward the pox and disease and death spreads from them and kills ever living thing... You will need super glue to attach these to the base... Yes the turfs have some tacky glue on them...but I find superglue holds them better...

We are nearly there... The final step before adding your mini is to paint the side... Again you can use any colour you like... But I am going for Steel Legion Drab...

Now you can finally add your mini...and yay you are done...... Also just remember what ever style you choose to do for your army,make sure you stick with it for the whole army......

Now I'm not sure which mini I will be starting this week... So its going to be a guess and wait and see, till next week to see which one I picked... So till next weekend... Goodbye and stay safe...

Look What Dropped (08/07/17)

Guess what GW dropped in to the Pre~Order box... That right the Poxwalkers and Marines.... And guess what readers??? ..... While I was in GW Store today I order one pack of each.. YAY!!! very excited girl..

They have also got some open play cards which I will pick up has well... Big times again for GW.... 

Poxwalkers

Death Guard Plague Marines

Death Guard Codex

Okies Hi everyone again for today lol.... This is a another real quick post.... GW have just dropped the Codex bomb.. that right the rumours where true... But the great news is Death Guard are no longer in with Chaos Marines.... We are getting our own codex.....YAY!!!

GW have said they are dropping ten then before Christmas... With the Space Marines been first...Next will be the Grey Knights and Chaos Space Marines...Then finally The sons of Mortarion.... **Happy Sigh** So I'm thinking maybe August at best... but more likely to be in September... I'm not a 110% sure... but YAY!!!! Ok so stay save and have fun..

Codexes FAQs

Warhammer 40k Army Roster

Hi everyone... This is a quick post today.... It involves the Army Rosters you see in the rule book and codices... Warhammer have now dropped a downloadable version on PDF (drop date 30/06/17)... This is great if you are like me and like to make copies of your list and print them out or even store them in a folder on a smart phone or tablet ......or be total oldskool and write them out by hand ...
Let me know in the comments box... which kind of list builder you are...
Stay safe everyone....

40k Army Roster

FAQ Updates For Chaos.....

Hi everyone... This is a quick post about the new FAQs that GW dropped yesterday..... If you are not aware you can find them on the Warhammer Community page .... But I thought I would share the ones for Chaos... There is only one update and a couple of FAQs for Death Guard..... The update is the sixth one down on the left hand side... And the FAQs are number three and four on the right hand side of the page....

Warhammer 40k Chaos FAQ/Update (02/07/2017)

There is a also a update for the Dark Imperium....

Dark Imperium FAQs/Update (02/07/2017)

Poxwalkers WIP

Hi hi and welcome to my second Saturday 

post...In this post we will be covering the first build of the poxwalkers you get in the Dark Imperium box~set... You get twenty of these little meat shields in then various designs ... Now a quick bit of information on these poor cursed victims of Nurgles's plague.....Poxwalkers shamble across the battlefield in reeking hordes. They engulf their enemies in rotting tides of grasping hands,gnashing teeth and squirming tentacles..They are the cursed victims of Nurgles's plague transformed into unliving weapons by the cruel masters of the Death Guard..

So what do you need to build these?? 

• Fine Detail Cutters.
• Mouldline Remover. ( Or craft knife...but please be careful if you use this tool to remove the lines).
• Drill.
• Plastic glue. (You can use super glue..but I like plastic glue).
• Superglue, wine cork and paper clips. (More on this later).
• Cutting mat or sheet to protect your table.
• Paints and brushes.

So the Poxwalkers come on two sprue with the letter D on them.. There is also one Chaos marine on each sprue.. But these are carefully marked... In this box~set you get a nice clear booklet which shows you how to build each miniature..

Once you followed the booklet and built your little Poxwalkers its time to get them ready to be painted.....This is where the drill, superglue & paper clips come in handy... Now you need to be really careful at this stage and if you don't feel ready or comfortable doing this, you can just glue them down on to the 25mm base... So take your drill and use the 1mm drill and drill a small hole in to one or both feet... I normally do one foot but each to their own on this... there is no hard and fast rule on how to do this..... Next take a flat paper clip and test the hole once your happy with it put a little bit of glue on the foot and place the clip in... This will dry with in a few minutes... Once dry cut the clip using some snips..but not your Fine detail ones... It will kill them... Then place it in to a cork plug... and your ready to paint...

There is some really good paints out there, to paint your miniatures in... I like the Games Workshop Citadel paint range to pain my minis...I base coat them normally in Army Painters Uniform Grey or In the case of these little guys Army Painters White... But again this up to you what you want to use.... GW do spray cans (or rattle cans) in white or grey .... So Here is a list of the Citadel colours I used for these four Poxwalkers:

• Athonian Camoshade (Shade).
• Nuln Oil (Shade).
• Agrax Earth Shade (Shade).
• Jokaero Orange (Base).
• Troll Slayer Orange (Layer).
• Rhinox Hide (Base).
• Doombull Brown (Layer).
• Zandri Dust (Base).
• Abaddon Black (Base).
• Leadbelcher (Base).
• Blood For The Blood Gods. (Technical).

I am super pleased with how these four turned out... Now normally I do five minis at a time... But I had a oohhh nooooo moment!!.... I started a new can of the white primer on the last mini... And I did my normal routine of shaking for two minutes then doing six passes on a piece of scrap card... Once I do this I'm happy to start painting my minis... Well first pass over my spray can exploded a massive paint blob all over my mini **ARRGGHHHH** So Don't worry in a few post times I will show you how I deal with moments like these... Anyway take care and enjoy your week...and next week we will cover bases... 

OMG

Hi everyone... I know this is a little early... has I say I would be posting again on Saturday... But I was checking out the Warhammer community page to day...While going through the page I spotted some thing totally awesome new...So what is this news I hear you say?? Well its this...

And this...

That right readers... New Death Guard from GW coming out hopefully next month..I say next month as we only have a few day left in June...
So We have some new awesome cool poxwalkers and different Plague Marines.... To say I'm a excited girl is a understatement... So readers when I know more... I will post up more info on launch dates and stuff on these new little plague suffering peoples....

Hello and Welcome...

Hello and welcome to my new blog... So who am I and what is this blog about??

I'm Lucy... I'm in my mid 20's and I am a Warhammer geeky girl... So that me covered now to the fun bit what is this blog about I hear you say!!... Well its all about following me start my new army build for the new edition of Warhammer 40k Dark Imperium... For them who have been living under a rock or on mars with the Adeptus Mechanicus.. This is the new 8th Edition rules...which dropped last Saturday (17/06/2017)...

So what do you get in this awesome box~set....You get a copy of the hardback rules.. two supplemental softback books containing the rules and background for the included miniatures, And dice and a ruler to get you going...So what miniatures are in this box~set?? You get a set of the twenty two new Primaris Space Marines...& thirty one Death Guard miniatures:

Primaris Space Marines.

• Primaris Space Marine Captain.
• Two Primaris Space Marine Lieutenants.
• Primaris Space Marine Ancient carrying an Adeptus Astartes banner.
• Two five men Primaris Space Marine Intercessor Squads.
• One three man Primaris Space Marine Inceptor Squad.
• One five man Primaris Space Marine Hellblaster Squad.

Death Guard.

• Death Guard Lord of Contagion.
• Death Guard Noxious Blightbringer.
• Death Guard Malignant Plaguecaster.
• Seven Death Guard Plague Marines.
• Death Guard Foetid Bloat-drone.
• Twenty  Death Guard Poxwalkers.

So that the miniatures.... Now which did I pick??? 

***Drum Role***

 

The answer is Death Guard... I went the way of Chaos.... So over the next many posts I will be showing the build of these little pox's,plagued,troubled marines...

So I will leave it for now and stay tuned for more updates following next Saturday...