Guy Haley's Death Guard....

Hi everyone... This is a quick post... while I was on the GW Community page I saw this article had dropped and makes good reading for us Death Guard players....

So sit back and enjoy the read.. Guy Haley's Death Guard

Stay safe and enjoy xx

July 2017 Product Review

***Disclaimer***

I do not work for Games Workshop or any other companies that are a part of Games Workshop.

This is my first product review....For my first review I am picking the Citadel Project Box from Games Workshop.... A lot of modellers would dream of having a whole room just for modelling... **The dream** but unfortunately we don't all have the space or our own home to do this... So we model wherever we can find some space, be that our bedroom, kitchen, living room ect... This is where the project box comes in to its own...

So what is the Project Box???? It is a combined storage box and workspace... It is built to hold all your modelling equipment in one handy space...There is a removable paint rack which holds forty nine pots of Citadel paint pots...It also comes with different slots and compartments to hold all your modelling tools and bits and bobs....The best part is the lid for the box becomes your workstation....You can place your cutting mat and palette book in the slots on the lid to hold them still....

The cost of one of these from GW website / store is £42 gbp...but with independents stores it will be cheaper...
Is it worth it??? Yes I think so...yes you could buy plastic storage boxes cheaper or a plastic tool box...but I like that this is all in one....
So overall I would give this a 8/10 has the lid doesn't quite fit right when locked down but nothing will fall out of it...

All Pictures from GW website....

What Is Tabletop Standard???

Ok everyone and welcome to my rambles and thoughts.... This is a little different then my normal news and build posts.... But I wanted to share my thoughts Tabletop Standard....Now there is no hard and fast rules on this...Everyone has their own thoughts on this... But here is my basic list for what is good TTS:

• Undercoated.
• Minimum of three colours.
• Base painted.
• Look good when on the table three to four feet away. (But close ups will show mistakes)

Now this will pass most gaming clubs rules and will help your friend or club players pick out what the mini is and what weapon they are carrying...

Now the next stage up:

• Undercoated.
• Minimum of three colours.
• Washes / Highlights.
• Painted in the lines.
• Base painted some base added to it.. Sand or Texture Paint and some Flock on it
• Look good when on the table three to four feet away. (Close up might show one or two little mistakes)

Now this is the level I set myself...I know I will not win any GD Awards (Gold Demon Award) But I think it is nice to have a nice painted army on the table... I like that my metal looks like metal and wood looks like wood and leather and other items, you get my drift... Now one or two places I go and play...I could win awards for my efforts hands down, because most of the game players there, think its ok to just play with black base coated minis... So what do I mean by painting in the lines???... It's mini not a colouring book...Well what I mean is details like pouches or pipes are painted clean up to the body with no over spill...The faces are clear and details show through... 

What do I mean by looking good on the table???... It means if a newbie walks in and they see you playing and your minis are nicely painted...not only is good for the game but it also encourages the newbie to stop and watch...Be honest with yourself...if you were to watch a battle rep??..would you like a fully painted army or a load of grey and black minis????... I know the answer I would pick... Now if you do get the chance to pick up one of my minis, hand on heart you might find the odd mistake... I'm not perfect but I do like to put some effort in... 

Well I hope this helps any newbies or game players who are worried about painting... Just have fun and go for it... And the more you do it the more you will get better at it and enjoy it....

Stay safe and have fun xx

Updated FAQs Boots on the Ground

This is the second update to the core rules and indexes for the new eight edition...I can only see one update for DG... But I will add the page links to GW Site for the whole rule set....

Warhammer 40k Rule Book

Chaos Index

Warhammer 40k FAQs Boots on the Ground

July 2017 P.S.A

Hi everyone... This is a quick P.S.A about two new items that will be happening this month and I will be carrying them forward from now on....
The first is Thoughts and Ramblings... This is where I will share my thoughts about the hobby and feelings I have in it... The next is a monthly product review... This will have a minimum post limit of one post a month...up to four maximum... It just depends on new products and items I have to review...
Stay tuned for this starting this week...
Stay safe and have fun xx

Foetid Bloat~Drone

Labouring through the air on buzzing turbines, the Foetid Bloated~Drone drifts towards the enemy like an armoured plague fly....Foetid Bloated~Drones are amongst the most horrific weapons in the Death Guard arsenal...More then just armoured attack vehicles, each drone is in fact a Daemon Engine, driven by the rune~bound essence of a warp entity....This hideous war engine closes to point~blank range before dousing it victims in virulent foulness....

So what do you need to build the Foetid Bloat~Drone.

• Fine Detail Cutters.
• Mouldline Remover. ( Or craft knife...but please be careful if you use this tool to remove the lines).
• Drill.
• Plastic glue. (You can use super glue..but I like plastic glue).
• Superglue, wine cork and paper clips. 
• Cutting mat or sheet to protect your table.
• Paints and brushes.

The Foetid Bloat~Drone is on sprue C with the DG Plague Marines.... Once again use the booklet which you get in the box~set.... It gives you clear pictures and information on how to build the different miniature..
If you are joining me for the first time, and would like more information on how I do my builds....Then please go and check out my first build post....Poxwalkers....

So Here is a list of the Citadel colours I used for the Foetid Bloat~Drone:

• Athonian Camoshade (Shade).
• Agrax Earth Shade (Shade).
• Druchii Violet (Shade).
• Carroburg Crimson (Shade).
• Death Guard Green (Base).
• Bugman's Glow (Base).
• Ceramite White (Base).
• Warplock Bronze (Base).
• Zandri Dust (Base).
• Abaddon Black (Base).
• Leadbelcher (Base).
• Naggaroth Night (Base).
• Xereus Purple (Layer).
• Pallid Wych Flesh (Layer).
• Brass Scorpion (Layer).
• Nihikakh Oxide (Technical).
• Nurgle's Rot (Technical).
• Blood For The Blood Gods (Technical).
• 'Ardcoat (Technical).  

As with the Noxious Blightbringer I began by giving the mini a priming and base coating all in one with the new Death Guard Green rattle cans.... Then the fun starts with picking out the different details and greebles.... As with the  Noxious Blightbringer here is a lot of detail parts to pick out on this model... I wasn't happy with the Plague Spitters being perfect at the ends.... So I set about with my drill and snips... I flatted the ends off and bored out the holes and roughed the ends up... I wanted the the Plague Spitters to be gnarly like the rest of the mini .... For the oozeyness dripping from the horns.... I went with a layer of Nihikakh Oxide over a base coat of Ceramite White... Then to finish of I used Nurgle's Rot to give it a gloss green Nurgley colour.. For the Eye... I picked this out in purple and and gave it a coat of Ardcoat to give it the glass effect... 

Overall I'm really pleased with the final outcome of this Foetid Bloat~Drone..... and it looks really good on the giant 60mm bases ......One final comment on this mini is..I love the way the mini sits on the base...It uses the pipes and other bits to hold it up instead of a flying base which is cool....

Take care and have fun xx

You Tube Videos I Follow

This is a little different then my normal posts.... Normally I just cover all things Death Guard.... Well I wanted to share with you all the different YouTube channels I follow for 40k stuff...
Now I'm going to list them...but not in any order...

• Green Stuff Games.... Comic~book Jo runs this channel... On Jo channel she covers the following stuff:

 Warhammer 40k, Warhammer Age of Sigmar, The Walking Dead All Out War, Malifaux, Wild West Exodus, Burrows and Badgers and much more including Box Openings, Shows ect...

• BitzBox......Craig runs this channel... On Craig channel he covers the following stuff:

Miniature war gaming, Unboxings, Painting Tutorials, Battle Reps and much more... He also does a live show on a Monday evening... Normally for a couple of hours around half eight GMT (UK Time).

• Inquisitor Jones....Inquisitor Jones run this channel... On his channel he covers the following:

Warhammer 40k, Warhammer Age of Sigmar, Unboxings and much more... Inquisitor Jones also does live streams...

Noxious Blightbringer

Heralds of pestilence and misery, Noxious Blightbringer pace solemnly before the Death Guard advance. They proclaim the arrival of Mortarion's sons through the tolling of their rusted Tocsins of Misery, hell~forged bells of massive size whose pearls rings through both the reality and the warp.

So what do you need to build the Noxious Blightbringer.

• Fine Detail Cutters.
• Mouldline Remover. ( Or craft knife...but please be careful if you use this tool to remove the lines).
• Drill.
• Plastic glue. (You can use super glue..but I like plastic glue).
• Superglue, wine cork and paper clips. 
• Cutting mat or sheet to protect your table.
• Paints and brushes.

So the Noxious Blightbringer come on sprue E with the Malignant Plaguecaster and a DG Plague Marines on it.... Once again use the booklet which you get in the box~set.... It gives you clear pictures and information on how to build each miniature..
For information on how I do my builds see my first build post....Poxwalkers....

So Here is a list of the Citadel colours I used for the Noxious Blightbringer:

• Nuln Oil (Shade).
• Agrax Earth Shade (Shade).
• Reikland Flesh Shade (Shade).
• Carroburg Crimson (Shade).
• Death Guard Green (Base).
• Bugman's Glow (Base).
• Screamer Pink (Base).
• Warplock Bronze (Base).
• Zandri Dust (Base).
• Abaddon Black (Base).
• Leadbelcher (Base).
• Naggaroth Night (Base).
• Xereus Purple (Layer).
• Pallid Wych Flesh (Layer).

I started by priming and base coating in one with the Citadel spray can of Death Guard Green.... Then I set about picking out the different details and greebles.... There is a lot of greebles on this model... So it worth looking at the painted one in the DG booklet that comes with the box~set to pick them out, if you can't see them.... And to be~honest I had thought I had got them all three times........only to find out that I hadn't.....so best to keep a eye out for them all.... And don't worry if takes you X amount of times to find them all.....Just keep looking around the mini.....
I'm really please with the final out come..... and looks really good on the 40mm base.... See my bases post if you haven't already on how I do them......

I've started next weekend build already... But you will have to wait till next Saturday... Stay safe and have fun...

Easy To Build Death Guard Plague Marines & Poxwalkers Box Opening

Hi everyone.... I picked up my box of Plague Marines and Poxwalkers this morning.... And I wanted to show my reads you guys and girls what you get in the boxes....

So lets start with the Plague Marines.... So inside the box you get your sprue which is green... It looks  Death Guard green.... And a booklet on how to build them and the rules... Plus you get three 32mm easy build bases.....
The minis look Awesome on the sprue and can't wait to build them up.....

Now lets have a look at the Poxwalkers..... So again inside the box you get your sprue... Again in lets call it Death Guard Green... A booklet and six 25mm easy build bases.....
Looking at the Poxwalker Sprue two of the minis are fully built and just need placing on the base.... The other four need just a arm or head fitting....
Again the mini look fantastic and looking forward to getting on with them...

So watch this space for when I finally get through the grey sea and start on this green sea of new minis.... Also I will be doing a few hacks with the base....

Death Guard Plaguebrust Crawler / New Death Guard Tank / Other Death Guard News

Hi everyone....this is a quick post about a new heavy support vehicle that is shown in the new Getting Started in Warhammer 40k.....

This looks awesome to me....but I feel it could cause marmite syndrome..with people loving or hating it... But for me I love it already... It is nice for Death Guard to have its only vehicles instead of the run of the mill Space Marines vehicles with horns on... Don't get me wrong I like the horned vehicle...but after thousands of years of no rules I would expect the vehicles to take on a new form or shape...so I am hoping that some of the current vehicle for Death Guard get a Death Guard remake over.....

So what do you get with the Plaguebrust Crawler...well from the picture it's clear you get a mortar of some kind...not sure yet..a three barrelled gun of some kind... I'm thinking some sort of blight launcher.. And two sponsons......which I think are plaguespitters / or maybe plague probe..but more likely plaguespitters..... Plus you get this awesome spiky bulldozer blade which is a bonus for close in combat...... By the way these are only my thoughts and not official GW party line... But I can't wait for it to drop...

While on the subject of GW dropping new stuff for Death Guard.... Check this picture out......

That right Death Guard Terminator.... But this for another post....

Poxwalkers Update One

Hi everyone and welcome to a quick update on my poxwalkers... I have finished this first ten now... And I'm super happy with them...I still have the next ten to do which you get in the box~set and also when GW releases the next set I will be getting a pack or two depending on how many you get in a box and if there is different styles.... But for now here is a few pictures and a List of paints I used to do this five.... If you are interested and only finding this blog for the first time check out my first poxwalker post for what tools and paints I used and the first four minis...

Paints list:

• Athonian Camoshade (Shade).
• Nuln Oil (Shade).
• Agrax Earth Shade (Shade).
• Seraphim Sepia (Shade).
• Jokaero Orange (Base).
• Troll Slayer Orange (Layer).
• Averland Sunset (Base).
• Yriel Yellow (Layer).
• Rhinox Hide (Base).
• Doombull Brown (Layer).
• Skrag Brown (Layer).
• Zandri Dust (Base).
• Abaddon Black (Base).
• Leadbelcher (Base).
• Blood For The Blood Gods (Technical).
• Khorne Red (Base).
• Nurgle's Rot (Technical).
• Typhus Corrosion (Technical).

These guys are now about done.... I dry brushed some Nurgle's Rot to the weapons & clothing and Typhus Corrosion ... I added this to take the shininess off from the weapons and clothes and bring them more in keeping of my idea of what a Poxwalkers would look like lol... But for now Here is a few more pictures of the nine models... 

Stay safe and have fun :D 

Bases...

Hi everyone and welcome to this weekend update... This weekend I want to chat about bases and what I have been doing in between painting my Poxwalkers this week... So bases sound simply right??? A round disk or square one depending on which game you play.... And yes you are right they are... But it is what you do to them which makes the difference between a ok mini and a great or even awesome mini... Now It all depends on what you have in mind for them... Some people use cork and build up their bases... Some use sand and some use paints and special paints.. and some even use a mix of all three.... There is no hard and fast rules on what you want to use or do for your bases.... So for me I will be using a special paint called Agrellan Earth... It is a texture paint that you paint on your base and it dry and cracks to form cracked earth.... I like this paint for this reason....

Now I paint the top of my base in Rhinox Hide first so if the texture paint does crack and break of in parts it wont show the black base... Now you can leave it at that with the Rhinox Hide and paint the side in what ever colour you wish and that is base done for the table top.... But I don't I take it up a notch and paint it the texture paint.... Now this texture paint can take any where from a hour to a few to dry and cracking depending on the heat and how much you put on...I like to leave my bases a full twenty four hours before I move on to the next steps...

Now you can leave it at that, with the texture paint ... Just paint the side in what ever colour you wish and that is base done for the table top.... But I like to take a few more steps... Next give each base a good coat of Agrax Earthshade..I leave this for a hour to dry... Then next its time to crack out the drybrush paint... I Ike to use Terminatus Stone over Agrellan Earth... Just to break it up and give it some texture.

Right the next step is to place flock turfs on the base to add some form of vegetation to it... Again you don't have to do this you could use micro rocks or bits of building...it is up to your imagination....In this case I am using these dead turfs I found online at a well know market site.. My idea behind the burnt/ dead grass ... is has the the Death Guard move forward the pox and disease and death spreads from them and kills ever living thing... You will need super glue to attach these to the base... Yes the turfs have some tacky glue on them...but I find superglue holds them better...

We are nearly there... The final step before adding your mini is to paint the side... Again you can use any colour you like... But I am going for Steel Legion Drab...

Now you can finally add your mini...and yay you are done...... Also just remember what ever style you choose to do for your army,make sure you stick with it for the whole army......

Now I'm not sure which mini I will be starting this week... So its going to be a guess and wait and see, till next week to see which one I picked... So till next weekend... Goodbye and stay safe...

Look What Dropped (08/07/17)

Guess what GW dropped in to the Pre~Order box... That right the Poxwalkers and Marines.... And guess what readers??? ..... While I was in GW Store today I order one pack of each.. YAY!!! very excited girl..

They have also got some open play cards which I will pick up has well... Big times again for GW.... 

Poxwalkers

Death Guard Plague Marines

Death Guard Codex

Okies Hi everyone again for today lol.... This is a another real quick post.... GW have just dropped the Codex bomb.. that right the rumours where true... But the great news is Death Guard are no longer in with Chaos Marines.... We are getting our own codex.....YAY!!!

GW have said they are dropping ten then before Christmas... With the Space Marines been first...Next will be the Grey Knights and Chaos Space Marines...Then finally The sons of Mortarion.... **Happy Sigh** So I'm thinking maybe August at best... but more likely to be in September... I'm not a 110% sure... but YAY!!!! Ok so stay save and have fun..

Codexes FAQs